The 800~1000A special type single-core cable connector is manufactured with reference to imported products. It has the characteristics of safety, reliability and convenient use. It is mainly used for oil drilling rigs and electric control.
      Main technical parameters:
Rated voltage: 750V
Rated current: 800~1000A.
Contact resistance: ≤0.1mΩ.
Insulation resistance: The insulation resistance between the contact piece and the sheath is greater than or equal to 500MΩ.
Withstand voltage: The contact part is subjected to AC 2800V 1 minute insulation dielectric
strength , and there is no breakdown and no flashover.
      Model:
YT444 current 800A (recommended to use imported 444 cable)
YT535 current 1000A (recommended to use imported 535 cable)
YT646 current 1000A (recommended to use imported 646 cable)
      Socket installation:
The socket is a taper screw, which needs to be installed and fixed on a ring with a thickness of 16mm On the oxygen
glass cloth board, the size of the openings is shown in the schematic diagram.
Phase-to-phase spacing ≥150mm.
      Contact:
pinhole mating diameter φ19.
Diameter of pin and wire barrel: φ21.5 (444 cable) φ24 (535 cable) φ26 (646 cable) The
connection ends of the pin jacks are protected by insulating sheaths.
      Structural form and basic size:

 
      Mounting hole size: